Customer GuideProduct Selection GuideSystem GuideTechnical BulletinsGalleryDistributors



Ask for the red can





Ask for the red can





Ask for the red can





Ask for the red can





Ask for the red can





Ask for the red can
[ System Guide ]

[Finish Coats]

TOBY UNITHANE CRYSTAL CLEAR GLOSS
data msds brochure
 One pack, solvent based moisture curing polyurethane
 Lower Odour, Xylene Free
 Crystal clear finish that highlights the natural grain of the timber
 Easily applied by brush, roller or lambswool applicator
 Excellent flow and levelling properties ensuring a smooth finish
 Long wet edge which minimises lap marks
 Extremely hard wearing scratch resistant finish
 Excellent chemical resistance properties

TOBY UNITHANE
Data MSDS
 One pack, solvent based moisture curing polyurethane
 Easily applied by brush, roller or lambswool applicator
 Extremely hard wearing scratch resistant finish
 Excellent chemical resistance properties
 Available in Gloss, Semi-Gloss, Matt or Satin.

TOBY LUSTAPOL
Data MSDS
 Two pack, solvent based polyurethane
 Mixing required, Part A and Part B (1:1)
 Easily applied by brush, roller or lambswool applicator
 Excellent chemical resistance
 Excellent abrasion and scratch resistance
 Very high gloss

TOBY SUPREME GLOSS
data msds
 High build, moisture curing polyurethane
 55% solids, excellent film build
 Lower Odour, Xylene free
 Extremely durable, clear colourless finish
 High Gloss

TOBY TUNG OIL
Data MSDS
 Traditional oil finish
 Allows individual board movement
 Easily applied by brush, roller or lambswool applicator
 Not necessary to use a sealer
 Maintenance program is recommended

TOBY UMO SPORT
data msds brochure
 Urethane Modified Oil
More durable than Tung Oil
Very good wear and scuff resistance
Excellent flow and levelling
Gives a natural oiled look to timber
Developed using low odour solvent
Available in Gloss and Satin

TOBY AQUAMAX DOMESTIC
data msds brochure
 Single pack, water based polyurethane
 Low odour during application and drying
 Extremely hard wearing scratch resistant finish
 Excellent film build
 Excellent flow and settling characteristics
 Available in Gloss and Satin

TOBY AQUAMAX COMMERCIAL SPORT
data msds brochure
 Two pack, water based polyurethane
Excellent wear and scuff resistance
Natural non yellowing finish
Low odour during application and drying
Excellent flow and levelling
Excellent film build
Low VOC - Meets green building standards <140g/L
Available in Gloss and Low Sheen

Unithane Crystal Clear Glosssupreme gloss
[Sealers]

TOBY G.F.BARRIER SEAL
Data MSDS
 Timber Sealer
 Solvent based
 Excellent barrier and grain filling properties
 Strong timber colour development
 Excellent adhesion
 Very fast drying
 Very easy application

TOBY RAPID SEAL
Data MSDS
 Timber and Cork Sealer
 Solvent based
 Flexible coating
 Natural timber colour development
 Excellent adhesion
 Extremely fast drying
 Very easy application

TOBY AQUAMAX ROLLER SEAL
Data MSDS
 Timber sealer
 Water based
 Roller applied
 Low odour during application and drying
 Fast drying and recoat time
 Excellent adhesion
 Reduces lap and/or shadow marks



PRODUCTS
SYSTEM
DESCRIPTION
FLOOR TYPES
SEALER SECTION
APPLICATION
Toby Unithane Crystal Clear Gloss
One Pack Moisture Cure
Polyurethane
Solvent based
Xylene free, extremely tough, scratch and chemically resistant finish. Resistant to everyday spills. Highlights the natural grain of the timber. Excellent flow and levelling properties ensuring a smooth finish. Long wet edge which minimises lap marks
Timber, Parquetry
& Cork
Toby Rapid Seal or, GF Barrier Seal or, Unithane Crystal Clear Gloss.
Apply one coat of selected Toby sealer and two coats of Toby Unithane Crystal Clear Gloss. A three-coat system
Toby Unithane
Gloss
One Pack Moisture Cure
Polyurethane
Solvent based
An extremely tough, scratch and chemically resistant finish. Resistant to everyday spills.
Timber, Parquetry
& Cork
Toby Rapid Seal or, GF Barrier Seal.
Apply one coat of selected Toby sealer and two coats of Toby Unithane. A three-coat system.
Toby Unithane
Semi-Gloss, Satin & Matt
One Pack Moisture Cure Polyurethane Solvent based
Used to provide the desired sheen or gloss level while providing an extremely tough, scratch and chemically resistant finish. Resistant to everyday spills.
Timber, Parquetry
& Cork
Toby Semi Gloss, Satin, or Matt are applied as a final coat over Unithane Crystal Clear Gloss, or Lustapol
Apply one coat of selected Toby sealer and one coat of Toby Unithane Gloss or Unithane Crystal Clear Gloss, or Toby Lustapol followed by either a coat of Unithane Semi Gloss, Satin or Matt, as desired. A three-coat system.
Toby Supreme Gloss
One Pack Moisture Cure Polyurethane Solvent based
High build, high gloss finish. Extremely durable, clear colourless finish. Xylene free with lower odour during application and drying*. Use over Unithane Gloss, or Unithane Crystal Clear Gloss.
Timber, Parquetry
& Cork
Toby Supreme Gloss is applied as a final coat over Unithane/Unithane Crystal Clear Gloss
Apply one coat of selected Toby Sealer, one coat Toby Supreme Gloss and one coat Toby Unithane Crystal Clear Gloss. A three coat system.
Toby Lustapol
Two pack
Polyurethane
Solvent Based
A very high gloss finish that is tough, resilient, abrasion and chemical resistant finish.
Resistant to everyday spills.
Timber &
Parquetry
Toby Rapid Seal ,GF Barrier Seal or Lustapol
Apply one coat of selected Toby sealer and two coats of Toby Lustapol. A three-coat system.
Toby Tung Oil
Oil based
Traditional finish that gives a natural "oiled look" to timber and also allows for individual board movement
Timber,
Parquetry & Cork
Toby Rapid Seal or Tung Oil.
Apply one coat of selected Toby sealer and two coats of Toby Tung Oil. A three-coat system.
Toby UMO Sport
Oil based
Durable finish based on urethane modified alkyd resins . It has excellent flow and levelling providing a smooth finish that enriches the natural colour of timber with a warm honey tone. It allows for individual board movement so edge bonding will not occur. It is ideal for use on sports floors as well as domestic and commercial floors
Timber,
Parquetry & Cork
Toby Rapid Seal.
Apply one coat of selected Toby sealer and two coats of UMO Sport. A three-coat system
Toby Aquamax
Commercial Sport
Two Pack
Polyurethane
Water based
Extremely hard wearing with excellent wear and scuff resistance. Excellent flow and levelling providing a smooth finish. Ideal for sports floors, high traffic commercial and domestic floors
Timber &
Parquetry
Toby Roller Seal or, GF Barrier Seal or, Rapid Seal
Apply one coat of selected Toby sealer and two coats of Toby Aquamax Commercial Sport. A three-coat system
Toby Aquamax
Domestic
One Pack
Polyurethane
Water based
An extremely tough, scratch and chemically resistant finish. Resistant to everyday spills.
Roller applied and low odour during application and drying.
Timber & Parquetry
Toby Roller Seal ,GF Barrier Seal or Rapid Seal.
Apply one coat of selected Toby sealer and two coats of Toby Aquamax Domestic. A three-coat system.
*lower than Unithane Gloss.


ADDITIVES

Compatible additives* can also be used with a range of Toby Timber Coatings. Under normal conditions additives are not required. The guide below explains where these additives may be required. These include:

 Flo-Add product for use with Unithane to minimise rejection and contamination of the timber data msds
 Wet Edge Extender to enhance flow characteristics of Unithane, particularly in warm temperatures data msds
 Wet Edge Extender to enhance the flow characteristics of Aquamax finish coats, particularly in warm temperatures data msds
 Catalyst to accelerate drying of Unithane in colder climates data msds
 Super Solvent used for cleaning application equipment used for applying Unithane and Lustapol data msds
 Reducer Thinners used for thinning Unithane and Lustapol data msds
 Non slip additive for Aquamax finish coats data msds

* Click on the datasheet to view compatible additive information.  For more information on compatible products please call 1800 073 530.



red can

[ About Us : Contact Us : Privacy Policy : Site Terms ]